Research project

Golden Eye

Intelligent dosing system

Project details

Description, goals and partners

Project specification

The aim of the research project is the development of an intelligent, image-based control of micro-dispensing valves for the application of fluids in the nanolitre range.
Within the scope of this project, a novel image analysis system is to be developed, which will make target-actual comparisons of the fluid droplets during application and surface wetting on the basis of graphic pattern recognition and display them in images. This innovative analysis tool should make it possible to analyze the optimum discharge quantity and the optimum degree of wetting of the fluid to be applied. In this way, the automated application of industrially used solder pastes for highly miniaturized electronic circuits on three-dimensional surfaces will be made possible for the first time.

Focus of the tasks of the project partners

th-koeln.de
TH Köln (Cologne University of Technology)
  • Analysis of the rheological properties of technical fluids (solder pastes, oils, lubricants, lacquers, fluxes, etc.) to determine the correct setup parameters for the application of different fluids with varying viscosities
  • On the basis of the determined parameters, a wide range of fluids should be able to be processed via the application system to be developed by means of slight interventions in the system, and ideally only in the software
  • Design of the valve including valve and plunger geometry as well as any radii, surfaces and materiality
  • Development of the application actuator (definition of the plunger speed when processing individual fluids in order to generate the corresponding application quantity)
  • Research into the impulse stroke of the plunger to generate an optimum droplet
  • Analysis of the valve, depending on the viscosity of the fluid, for the application of specific quantities
bahner-gmbh.de
Bahner Feinwerktechnik GmbH (precision engineering)
  • Development of a suitable novel and variable actuator for controlling the dosing valve, which can be coupled in real time to the feedback of the sensor system (electromechanical, pneumatic or hydraulic approach)
  • Implementation of the sensor technology developed by iMes Solutions GmbH for inline detection of the fluid volume and the dosing quality in the dosing system
  • Assembly of all mechanical and electronic components in a compact dosing system
  • Development of a prototype
iMes Solutions GmbH
  • Implementation of an image-based measuring system that can evaluate the fluid volume and the application quality of the dosing system on the basis of graphical evaluations - consisting of a mono camera and an external computing unit
  • Conversion of an image-based hardware based on a 2-D image into a valid measurement result with regard to fluid volume and application quality
  • Training the program with numerous mathematical and graph-based algorithms

Intended results

The image-based approach to application checking of fluids is a complete novelty in the field of dosing technology. This innovative analysis tool will make it possible to analyse the optimum dispensing quantity and the optimum degree of wetting of the fluid to be applied. Thus, for the first time, the automated application of industrially used solder pastes for highly miniaturised electronic circuits on three-dimensional surfaces will be possible. Furthermore, precisely controlled quantities of grease or oil can be applied to miniaturised components such as micro gears.

Interested? Talk to us.

We look forward to hearing from you.

Book an intro call Contact

Continue to appointment booking

To book an appointment you leave imes-solutions.com. Booking is handled by the external provider Calendly.